Home > Digital Refrigeration Controller >

SF 102S AC12V Chiller Freezer Digital Temperature Controller For 1 HP Compressor

Product Categories

Commercial Cold Rooms [44]
Deep Freezer Cold Room [38]
Walk In Coldroom [54]
Air Cooled Refrigeration Unit [144]
Water Cooled Refrigeration Unit [30]
Coldroom Condensing Unit [30]
Monoblock Unit [14]
Cold Room Evaporators [22]
Hermetic Compressor [108]
Semi Hermetic Compressor [34]
Coldroom Parts [18]
Digital Refrigeration Controller [28]
Refrigeration Service Valves [44]
Refrigeration Fan Motors [14]
Refrigeration System Components [28]
Air Conditioner Tools Kit [8]

Shenzhen Sino-Australia Refrigeration Equipment Co., Ltd.

Contact Now

SF 102S AC12V Chiller Freezer Digital Temperature Controller For 1 HP Compressor

Brand Name : SF

Model Number : SF-102S

Certification : CE / UL / SGS / CQC

Place of Origin : China

MOQ : 5 sets

Price : negotiate

Payment Terms : T/T

Supply Ability : 1000pcs per weeks

Delivery Time : 4-6 weeks

Packaging Details : cartons

Function : Temperature display,control and adjust

Screen display : Red

Application : Chiller and freezer refrigeration unit

Name : Digital Temperature Controller

Sensor : PTC / NTC

Power : 220V

Contact Now

SF-102S Digital Temperature Controller For Freezer,Chiller, Refrigeration System, Condensing Unit

Features of Function

* Mini-sized and integrated intelligent control and applicable to the compressor of one HP.

* Temperature Display/ Temperature Control/ Manual, automatic defrost by turning off /Light Control/Value Storing/ Self Testing /Parameter Locking.

Specifications

1. Output of the outside sealed transformer:AC12V(one transformer matched with one temp. controller)

2. Temperature sensor: NTC, Double sensors(for cold room temp.&defrost control),2m(L)

3. Range of temperature displayed : -45 ~ 45℃ ; Accuracy:±1℃

4. Range of set temperature: -45 ~ 45℃ ; Factory default :±1℃

5. Temperature of the operating environment: -10 ~ 60℃ ; Relative Humidity:20%~90%(Non-condensing)

6. Relay rated coil voltage:12VDC

7. Relay output contact capacity: -Compressor relay: N.O. 30A/250VAC (applicable to 1 HP Compressor,if more connected to AC contactor) -Light relay: N.O.30A/240VAC

Technical Parameters

Parameter	Function	Set range	Default
E1	Lower setpoint limit	-45℃~Set temp.	-35℃
E2	Higher setpoint limit	Set temp.~45℃	20℃
E3	Temp.hysteresis	1~10℃	4℃
E4	Comp.start delay time	0~10Min	2Min
E5	Offset on room temp.	-5℃	0℃
E6	Offset on evap. temp.	-5℃	0℃
F1	Max.Defrost duration	1~60Min	20Min
F2	Defrost interval time	0~24Hr	6Hr
F3	Defrost termination temp.	0~20℃	8℃
F4	Display during defrost	0=normal display 1= last value before defrost	0
C1	Temperature unit	0=℃	0

Notes for Installation

1. Sensor leads must be kept separately from main voltage wires in order to avoid high frequency noise induced. Separate the power supply of the loads from the power supply of the controller.

2. When installation the sensor shall be placed with the head upward and the wire downward; The evaporator sensor must be installed between the fins of the evaporator in the area, where probably the ice is the thickest.

3.In case of long-distance sensor installation from the controller, the sensor cable may be prolonged up to 100 m max. without any re-calibration.

4.The temperature controller can not be installed in the area with water drops.

Accessories for the temperature controller

1. One attached transformer and two relays

2. Two temperature sensors

3. One installation stand

Product Tags: